How Come Sts Wont Upload Project Files

Upload and publish:

• Drawing and pattern files (including PDFs, IFCs, DWFs, linked Revit files and DWGs with xrefs)

• Supporting documents (for example, calculations and configuration files)

  Note: Supporting documents come in multiple file formats and complement design files with additional or version-specific information. Refer to the Supported Files topic for more information.

Organize specific versions of your documents into sets in a way consistent with best practices for Document Management in the AEC industry.

Annotation: When using Revit Cloud Worksharing to upload and publish files to Document Direction, you tin can command the views and sheets that are published. Refer to the Select Views and Sheets to Publish to the Cloud topic in the Revit help for more details. You can also refer to the two videos linked below to see the uploading and deject worksharing steps in action:

Upload and Publish Files

Use this method for non-linked PDFs, drawings and design files. The workflow for uploading PDFs differs from other files, as you can specify a title cake (layout template) during upload. If you are uploading several individual PDFs at one time, you can assign the aforementioned title block to all documents.

You can too add documents to a set during the upload to organize specific versions of your documents. Uploading and publishing consists of the four following workflows:

1. Upload

1. In the Folder tree, select the folder y'all want to upload files to.

2. Click the Upload files drop-downwards menu and select Upload file.

   

3. Navigate to the file on your estimator that you lot want to upload and select it for upload.

   Tip: You tin can besides drag and drib a file from your estimator into the BIM 360 folder.

   Note: To select multiple files, press Shift+Click or Ctrl+Click.

4. Select Add Files to upload additional files.

ii. Select Layout Template

If you are uploading PDFs to the Plans folder, in the Layout Template column, select a template (title block) or select New Title Block. Alternatively, go along with no template and specify it afterward.

Note: In the Plans binder, the document name is controlled by the template settings. For more than details, see Use Title Blocks.

Tip: While uploading documents, you tin can download the original version of the file that is being candy, in gild to interact with the file. To practise that, from the top toolbar select Download source file.

3. Select or Create Gear up

To add together the document versions to a set:

1. Click Gear up not specified.

2. Cull Publish to a new set to create a new prepare (projection administrators simply). If you choose this selection, provide a Fix proper name. The Issuance date is optional.

3. Optionally, choose Publish to an existing prepare if your set already exists.

   Tip: If y'all have multiple sets, use the search box to quickly observe the ready you need.

4. Click Continue.

You lot can too sentinel this video to acquire more about how to add documents to a fix.

4. Publish

1. Select Continue. Your files are then candy and published. A Results dialog box is displayed when completed.

   Tip: When uploading documents to the Project Files folder that consist of multiple pages, sheets, or views, you can open the individual pages in the viewer that have already been extracted, while the others are still processing. Refresh the viewer to update the pages that can be viewed.

   Notation: You can move and make copies of files that are being candy. In the Folders view, select Copy or Move from the top toolbar.

2. Select Show to view the published files in your binder.

Tip: When you open up a document in the Plans folder, the set-specific information is displayed at the top left of the document, side by side to its proper name and version. Information about the set up is not displayed in documents in the Projection Files folder.

Upload and Publish Linked Files

Upload linked Revit files or AutoCad files that include xrefs. You lot must specify the parent or host file, which volition be linked to the child file data.

Note: You cannot drag linked files. Revit linked files must be linked in Revit outset.

1. In the Folder Tree, select the folder you lot desire to upload files to.

2. Click Upload Linked Files.

   

3. Either:

   • Select the parent (host) file, or
   • Printing Shift+Click or Ctrl+Click and select all files to be linked (parent and child).

4. In the Linked Files Upload dialog box, select Add together files and choose boosted (child) files if necessary.

5. In the Parent File column, which appears afterward upload is complete, cheque the parent file Continue.

   • Your linked files are then candy and published. A Results dialog box is displayed when completed.

6. Select Evidence to view the published files in your folder.

marinosithe2001.blogspot.com

Source: https://knowledge.autodesk.com/search-result/caas/CloudHelp/cloudhelp/ENU/BIM360D-Document-Management/files/To-Work-with-Document-Management/About-Uploading-and-Publishing/GUID-1B49B17A-12C3-47A1-9AAC-EFC46AF9D7AD-html.html

Share this post